|
|
Washing processes
Backed by over thirty years of experience,
SME has succeeded in developing efficient, quality solutions for washing problems.
Here's a list of the most common washing problems solved
by SME.
| WASHING POLISHED ALUMINIUM | |
| Material | ALUMINIUM SOILED WITH: POLISHING PASTE, EMULSIFIED OIL, WHOLE OIL. |
| SME Systems recommended | 2-BATH MODELS WITH INTERMEDIATE RINSING OR 3-BATH MOD. |
| 2-PHASE PHOSPHO-DEGREASING | |
| Material | STEEL, CAST IRON, ALUMINIUM. |
| Processing | PICKLED SHEETS AND PARTS WITH LIGHT DIRT FROM PROCESSING (E.G. FLUID OILS, EMULSIFIED OIL ETC.) |
| SME Systems recommended | 2-BATH MODELS OR 1-BATH MODELS WITH DISPOSAL OF RINSE WATER. |
| CLEANING ALUMINIUM | |
| Material | MACHINED ALUMINIUM. |
| Contaminants | SHAVINGS AND EMULSIFIED OIL. |
| SME Systems recommended | MULTI-STAGE TUNNEL |
| PHOSPHATING IN 4 PHASES BEFORE PAINTING | |
| Material | STEEL, CAST IRON, ALUMINIUM. |
| Processing | DEEP DRAWING, SPINNING. |
| SME Systems recommended | 2-BATH MODELS WITH DISPOSAL OF RINSE WATER OR 3-BATH MODELS. |
| WASHING WITH PRE-PACKAGING PROTECTION | |
| Material | STEEL, CAST IRON, ETC.. |
| SME Systems recommended | 2-BATH MODELS |
| WASHING AFTER OIL QUENCHING | |
| SME Systems recommended | 2-BATH MODELS WITH KITS FOR HIGHLY CAUSTIC PRODUCTS |
| WASHING OF PARTS TO BE BONDED | |
| Material | STEEL, CAST IRON. |
| SME Systems recommended | 2-BATH MODELS. |
| WASHING BRASS AND BRONZE | |
| Material | BRASS, BRONZE, COPPER AND ITS ALLOYS. |
| SME Systems recommended | 2-BATH MODELS. |
| STRIPPING PAINT FROM STEEL | |
| Material | STEEL, CAST IRON. |
| SME Systems recommended | 1-BATH MODELS FOR PAINT STRIPPING ONLY, 2-BATH MODELS FOR COMPLETE PROCESS. |
